Ordinary Greatness

It's always nice to keep a beer on tap that you can drink more than a few pints of and still remember to feed the dogs. English bitters are a great beer for that. For a long time I would never order an ordinary bitter or extra special bitter off of a beer menu because I always thought they were going to be, well...bitter. In fact they are usually much less bitter than a standard American pale ale having an average IBU of 25-35.

Since trying a few I thought it was time to throw one on tap. My plan was to shoot for a beer on the high end of the ordinary bitter style range but after hitting some really good efficiency on my new system I ended up with a wort more resembling a premium bitter, clocking in at 1.045.

Gregg and I made 10 gallons of this beer using imported ingredients that will resemble a beer that would get served to you in England. Although these are typically served from a cask, which I don't currently have, I plan to keep the carbonation low at around 1-1.5 volumes.

Brew day went well and we ended up with exactly 10 gallons of wort. To make things more interesting Gregg decided to pitch WLP 001 and I pitched S-04 English Ale yeast so that we could taste how each yeast effected the flavor of the final product.

Fermentation started within a few hours and was churning strongly by morning sitting right at 68*, ambient temps of 65*. One day into fermenting I slowly lowered the temps down to 65* to keep esters at a minimum. It was done within 3 days and had already flocullated and dropped out, S-04 is a workhorse!



Brewed 3/5/11

3/13/11 - FG 1.010 Tasted some diacetyl but it was very clear.

3/22/11 - Diacetyl was gone, Kegged.

Ordinary Greatness

13.3 LBS Maris Otter
8 oz Crystal 120L
4 oz Special B
1.5 oz Fuggles 60 min
.7 oz Fuggles 30 min
.6 oz East Kent Goldings 30 min
.4 oz East Kent Goldings 10 min
Irish moss 10 min
Yeast nutrient 10 min

Rye IPA

My obsession to find a good deal on brewing equipment on craigslist lead me on a two hour drive, in a blizzard, driving a rear wheel drive box truck with bald tires to pick up a boat load of goodies for a steal. I was able to grab 3 SS 10 gal. pots with ball valves and thermometers, 4 propane burners, a 3 tier gravity brew stand, kegerater, some carboys, corney keg, 2 CO2 tanks and regulator, 2 propane tanks, wort chiller, as well as a bunch of other misc. stuff. Luckily for me this guy used the system once then decided (or someone decided for him) to quit drinking. Quitter.

So anyways, I was very excited to give my newly acquired system a test drive, and my buddy Gregg got to brew his first all-grain batch with my old pots. I had just tasted a very good rye IPA and wanted to take a shot at my own.

The brew day got off to a rough start with one of my new pots having a leak and Gregg missing his mash-in temps...3 times! Its OK Gregg your Mom still loves you. Once we got rolling though everything went smooth. We smoked a good cigar and drank some good home brews. I had just kegged my French Saison which turned out really well, so we got to sample that for the first time. That might end up being one of my standard house beers.

Rye IPA: Brewed 3/3/11

10.5 #s 2 row

1 # rye

1 # wheat

.5 # crystal 60L

1 oz centennial first wort hops
.5 oz simcoe 10 min.
1 oz citra 2 min.
.5 oz simcoe flame out
.5 oz each simco, centennial, citra dry hops

irish moss, yeast nutrient 10 min

wlp001 1500 ml starter on stir plate 2 days before

3/30/11 If you like a face full of hops, this beer is for you! Real good, hoppy but not real bitter. Could prob use a bump up in the early hop additions to balance it out just a bit.

2 beers 1 day: French Saison & Irish Red Ale



Smelling the Greatness



Over the past few weeks I have been showing my buddy Gregg the ropes in the world of brewing. He has officially 'caught the bug'. So we both wanted to brew this weekend. I had a French Saison planned and he wanted to try brewing his first beer without my help.

We both made starters a few days before, I went with Wyeast 3711 and he chose WLP004. I chose 3711 for a few reasons, I wanted the beer to finish very dry and I have heard of this yeast putting a serious whooping on some sugars, taking it down past 1.010. Also I wanted all of the peppery and citrusy esters that it is known for.

My malt bill was simple for the Saison, mostly Belgian pilsner and a little Belgian wheat. I have been on a very simple malt bill kick lately to try and understand what each of them does for any given beer. I wanted to accentuate the peppery, spicy yeast notes by only using Saaz hops which can have those same characteristics.

Being Gregg's first beer he chose to do an extract batch with specialty grains, light malt extracts, roasted barely for that nice red color and some crystal 80L.

Brew day went well except for the fact that I didn't hit my efficientcy that I was hoping for but I think it is because I did a single batch sparge instead of splitting it into two batch sparges which is my normal.

Irish Red Ale

Brewed on 1/30/11 By: Gregg

5 Gal.

OG 1.067

FG 1.020 (anticipated)

IBU 20

SRM 17

6 lbs Light DME

3 lbs Light malt extract

6.5 oz Crystal 80L

3.5 oz Rosted Barely

1 oz Cluster 60 Min.

.5 oz Cluster 30 Min.

WLP004

1/31/11 - Lets just say its a good thing we put a blow off tube on that bad boy!

French Saison

Brewed on 1/30/11

5 Gal.

OG 1.046

FG 1.010 Anticipated

IBU 26

SRM 4

9 lbs Belgian Pilsner

1.25 lbs Belgian Wheat Malt

1 oz Saaz 60 Min.

1 oz Saaz 10 Min.

1.5 oz Saaz Flame Out

Yeast Nutrient & Irish Moss

Wyeast 3711 (Made 1 Liter Starter on stir plate)

Royal Oak Stout

Since I had such a nice, relaxing time making my Honey Amber Ale on my stove inside I was quick to do something similar. For this beer I decided to do a partial mash on the stove top using a steeping bag to mash in. I'm not sure where this beer will end up but here is how it got started. I am getting low on stouts, I only have 4 bottles of an oatmeal stout left that I made last April but am planning on saving these for a while to see how they age out.

The base wort is pretty simple, just using a few pounds of maris otter, pale LME,  crystal 80L, and some chocolate malt. I don't want it to be a sweet stout, dry stout, American stout or an export so I guess this one won't fit into any category or specific style which I think too many brewers focus on. I want to make good beers that taste good to me, not for a judge who is worried about IBUs, SRMs etc.



Rehydrating Yeast



This beer is made to focus on the specialty grains and malts. It doesn't have any finishing or dry hops, nor will it have a specific yeast character as I chose to use a very neutral strain. I am also going to be soaking some oak chips in some crown royal for a week or so before I add it to the secondary fermentor to give it that bourbon barrel stout flavor which I hope stands out but isn't over powering. To accomplish this I will only use about 3/4 oz of oak and 4-5 oz of crown. I will be taking samples almost everyday until I get the taste right where I want it. I know from sampling some other beers aged in oak that it can easily become way too oaky.



What I haven't decided yet is if I am going to funk this beer up with some Brett. And if I do, what Brett. I will use. It most likely will be Brettanomyces bruxellensis which is moderate in its flavors and intensity. Who knows, It may even get some sour cherries added to it this summer. Stay tuned to see what the future holds...

Royal Oak Stout

Brewed by: Gregg and I

Brewed on 1/14/11

3.8 Gallons partial mash

O.G. 1.061

F.G. 1.015 (anticipated



IBU 33.7

SRM 33.6

85% efficiency

3 lbs maris otter

3 lbs pale LME

10.1 oz roasted barely

5.6 oz crystal 80L

2 oz chocolate malt

1.5 oz fuggles 60 min.

.4 tsp yeast nutrient 10 min.

.4 tst irish moss 10 min.

Nottingham yeast (rehydrated)

1/21/11 Racked to secondary. Gravity: 1.014. Tasted good with lots of coffee notes.

2/9/11 Added .75 oz of oak chips that I have been soaking in 4 oz of Crown Royal. (added the Crown too)



Honey Amber Ale

So I was leaving work to start my week 'staycation' and really wanted to brew some beer. The only thing was it was 4:00 PM, snowing and really cold out. I decided I was gonna do something I haven't done in a long time and brew an extract batch on my electric stove.

I wanted to brew an amber ale but decided that 25% of the extract bill was going to be honey. Since it was all on a whim I wasn't able to get great quality honey but it should still turn out fine. Since my stove struggles to get anything over 3 gallons to boil I decided to do a 3 gallon batch and possibly add some water at the end to bump it up to 3.5 gal.

I boiled about a gallon of water for ten minutes covered in tin foil then threw it outside to chill in the snow while I brewed. I brought 3 gal. up to 155*f and steeped some crystal 80L for a half hour or so to get that nice amber color and sweetness I wanted. It smelled really good and the whole time I was wondering why I don't do this more often when there is inclement weather, which around here is quite often.

For the hops I decided to only use one variety so that I could really taste it by itself, I chose cluster. I wanted to keep the IBU's on the lower end so I didn't go overboard with early additions. Also since it is so cold out and I heat my house with wood I had to choose a yeast that could handle a temperature swing down to the lower 60's so I decided to use S-05.

I finished the 60 min. boil and chilled the wort down to 70ish in an ice bath which I later added some snow balls to when I was out of ice. It chilled rather quickly and I decided to add the water I had boiled earlier even though I didn't really need it. I had drank a few beers and getting more beer out of the time spent just seemed logical at the time.

Honey Amber Ale

Brewed on 1-7-10
3.5 gallons
Extract w/ steeping grains
OG 1.044
FG 1.012 (Anticipated)
IBU's 24.2
SRM 12.5

3 lbs light malt extract
12.2 oz crystal 80L
0.6 oz cluster 60min.
0.8 oz cluster 15min.
1 oz cluster 0min.
1 lb. honey into fermenter
dash of irish moss at 10min.
dash of yeast nutrient at 10min.
S-05 rehydrated

12 hrs later: happily fermenting with a 1 inch krausen.

1/21/11 Finished very dry at 1.008 although it tastes sweet. Tasted very good with lots of citrusy almost tangerine notes to it. Kegged.

New Years Eve IPA

New Years Eve 2010 in Northeast OH was such a beautiful day out. We had sunny skies and it almost hit 60*F which is crazy for this time of year! The best way to end the year on a day like that is to invite the guys over, sit in the garage and brew some beer.

I wanted to brew something hoppy that would be a good session beer, so I decided to keep the OG around 1.050. I also had been reading a lot about 'first wort hopping' and wanted to give it a try. From what I have read it adds some complexity to the flavor while only contributing a little bit of bittering units. I also wanted to keep the malt bill very simple. I chose to use some maris otter I had laying around and some crystal 40L. Brew day went great, hung out with the dogs, and drank some brown ales and porters I had on tap. We mashed in at 150*F which is exactly what I wanted so that the beer would have a lot of fermentables and finish nice and dry, although the maris otter should add some body and maltyness to the beer. We used Tetnang for the FWH and cluster, chinook, and cascades for the rest. We ended up hitting an OG of 1.055 but only collected 4 gallons which I contribute to more boil-off than I had expected. We cooled it down to 75*F fairly quickly with an immersion wort chiller since the ground water is nice and cold right now. I pitched some S-04 that I made a starter with a few days prior. I originally wanted to use Wyeast 1056 but when I got it out of the fridge it smelled a little funky and decided to dump it.

Planning on keeping this in the primary for about 3 weeks then getting it into the keg with some more homegrown cascades. I have an empty handle on my keezer and need to get something in there!

New Years Eve IPA
Brewed on 12/31/10
5 Gallon (Anticipated)
All Grain
Measured OG 1.055
Anticipated FG 1.014
IBUs 40
SRM 6.8

8 lbs 8 oz Maris Otter
8 oz Crystal 40L
.75 oz Tettnang FWH
1 oz Cluster 60 min
1.5 oz Homegrown Cascades 3 min
1.5 oz Chinook 3 min
Plan to put 1.5 - 2 oz Homegrown Cascades dry hopped in keg.
.5 tsp yeast nutrient 10 min
.5 tsp irish moss 10 min
S-04 (used starter, second generation)

1-3-10 Airlock activity has slowed almost to a stop. S-04 usually finishes very fast for me.

1-12-11 Due to a quick swing in temps at the house it got stuck around 1.023. I racked it to a secondary to let it sit another 2-3 weeks. It still tasted really good so even if the gravity doesn't chance I might just keg it and drink it as is or add some Brett. and make it a funky ipa...

1/21/11 FG 1.018 Tasted good, decided to keg as is and not dry hop since it really didn't need it.